€220,22 with TAX
The modules are designed for data collection from battery-powered WACO system modules and data conversion to the M-Bus communication protocol.
The WM868-SJ-MS-LP-H modules (hereinafter “collection units”) are designed to collect data from battery-powered modules that operate in the active communication mode, which means that to save batteries, they are not permanently “on reception”, but they transmit data actively, at set intervals, or spontaneously, based on an alarm event. The bus unit captures messages from the battery modules and stores them in its memory so that it can be transmitted in passive mode (on request) to the master of the master M-Bus. The bus unit therefore converts the communication mode from active to bus (passive) and at the same time converts the data format from WACO to M-Bus. Through the collection unit, devices with a pulse output, analog output, or wireless thermometers or hygrometers of the WACO system can also be connected to the virtual bus so that they appear to the bus master as a device with an M-Bus data output.
The WM868-SJ-MS-LP-H module is equipped with a physical M-Bus Slave interface. The module is part of the WACO bus system. It is used for data collection from consumption meters, sensors and sensors of the WACO system and data conversion into the M-Bus communication protocol format.
The module with a transmitting power of 25 mW requires power supply from an external 24V source. The module is adapted for mounting on a DIN-rail and is designed for indoor use (IP-20 protection).
The modules are most often used in applications of M-Bus systems, which are widely used especially in the field of remote reading of consumption meters (“metering”, “smart metering”).
external DC 24 V
You may also like…
WM868-SJ-R4-LP-H€210,54 with TAX
BOX-MS (1.3)€95,59 with TAX
W-A2-TS€6,05 with TAX
converter USB-CMOS€31,46 with TAX
WM868-SJ-R2-LP-H€210,54 with TAX
WM868-SJ-RK-LP-H€133,10 with TAX
BOX-M (1.1)€84,70 with TAX
There are no reviews yet.